Cool Roof

The Hydro-Stop PremiumCoat system has been tested and greatly exceeds the requirements of the Department of Energy for being a cool roof system. Some advantages of a cool roof system are:

  • Reduce cooling energy cost
  • Reduce Air Pollution
  • Extend Equipment Life
  • Reduce the need for re-roofing

PremiumCoat System

Roof_PC

PremiumCoat sustainable roofing and waterproofing system is one of the highest quality waterproofing and roofing systems available. It is recognized by Factory Mutual as a Class 1 roofing system as both a stand alone roof system and as a recover system over a variety of substrates. PremiumCoat is easy to apply, safe to work with and requires no special equipment. The system includes a 10-year warranty in specific roofing applications which can be extended every 10 years under a proper maintenance schedule. Uses:

  • Metal roof waterproofing and cooling
  • Parapet wall waterproofing
  • Flat and low-pitched roof waterproofing
  • Flashing of all types
  • Concrete waterproofing
  • Plywood waterproofing
  • Deck waterproofing
  • Exterior wall waterproofing

BarrierGuard System

kymax_application_152

BarrierGuard is designed for waterproofing all types of masonry surfaces such as foundation walls, concrete panels, exterior basement walls, retaining walls and moisture-retaining structures. Uses:

  • Waterproofing foundation walls
  • Waterproofing basements
  • Lining water-retaining structures
  • Waterproofing masonry shrubbery boxes

FlexCoat System

Diathon_SPFroof

FlexCoat is a “crackbridging” Elastomeric coating designed for waterproofing exterior walls. Uses:

  • Stucco wall waterproofing and crackbridging
  • Concrete wall waterproofing and crackbridging
  • Brick and masonry wall waterproofing and crackbridging
  • Concrete block wall waterproofing and cracking

ClearGuard Plus System

hydro-stop

ClearGuard Plus is a state of the art water repellent formulation which provides a durable subsurface, clear protective barrier against water, oil, water-based dirt and oil-based dirt. Uses:

  • Water and oil repellent for mortar, brick, stucco, split concrete
  • Oil-based dirt and water-based dirt repellent on vertical and horizontal surfaces

StableRust Primer

StableRust Primer is a water based surfactant-free primer used in direct metal applications to stabilize and protect metal surfaces. Uses:

  • Direct to metal applications
  • Metal
  • Anti-corrosion primer
  • Great stain blocker on other types of surfaces

SureBond Primer

SureBond Primer is a water based pure acrylic primer used for sealing all types of masonry. metal and chalky surfaces for painting and sealing. Uses:

  • Surface primer for all types of masonry
  • Surface primer for old chalky paint for decks and walking areas

CleanAct Primer

CleanAct rinsable EPDM primer is a water based rinsable primer used directly on EPDM rubber roof applications to prepare the rubber substrate for acceptance of the PremiumCoat System. Uses:

  • Direct to EPDM rubber roofs

TrafficCoat

TrafficCoat is a specially formulated coating for use over the PremiumCoat System. It resists wear, yet remains flexible to absorb surface stresses and provides a positive aesthetic appearance. Uses:

  • PremiumCoat decks
  • Walkways
  • Tennis Courts

Mega-Comparison-678x1866

EM 200S Mechanical Seam

em200s

The 2″ mechanically seamed metal roof system enhances the architectural appearance and is engineered to exceed most wind load requirements in the country. The versatility of this profile’s engineering allows the designer the ability to specify from low to steep slope applications. The concealed fasteners and patented articulating two piece floating 200 Mitchell Clip assist in minimizing the appearance of oil canning.

em200s

EM 175S Snap Seam

em175s

The 1-3/4″ Snap Lock profile provides a continuous interlocking metal roof system. The system offers the designer a concealed fastener and clip application that allows for expansion and contraction. The Snap Lock metal roofing system can be installed quickly, reducing labor costs. This is a simple installation with extremely high design pressures. The EM 175S metal roof system is available in steel or aluminum.

em175s

EM 150SS Mechanical Seam

em150ss

The 1-1/2″ traditional mechanically seamed metal roof system enhances the architectural appearance and is engineered to exceed most wind-load requirements in the country. The seamed profile allows the designer the ability to specify various applications. The concealed fasteners and patented articulating two piece floating 150 Mitchell Clip assist in minimizing the appearance of oil canning.

em150ss

EM 150SL Snap Lock

em150sl

The 1-1/2″ Snap Lock metal roofing system is designed to be installed quickly, reducing labor costs and offers the designer a concealed fastener and clip application that allows for expansion and contraction.

em150sl

Soffit & Wall Panel

soffit

Soffit and Wall Panels are designed for wall, fascia, and soffit applications where a flush or flat wall appearance is desired. Available with optional stiffening beads and ventilation.

Not intended for use in roofing or mansard applications.

soffit

Duro-Guard® Insulation

Duro-Guard® ISO and EPS Insulation panels are available in a variety of products for use with Duro-Last Roofing Systems, providing high Long-Term Thermal Resistance (LTTR) values. Duro-Guard insulation panels contain no CFCs or HCFCs; have Zero Ozone Depleting Potential (ODP); are EPA compliant; and have virtually no Global Warming Potential (GWP).

Duro-Guard® ISO Insulation

  • Duro-Guard ISO II
  • Duro-Guard ISO III CG
  • Duro-Guard ISO HD
  • Duro-Guard ISO HD Composite
  • Duro-Guard ISO Flat – HP
  • Duro-Guard ISO NB
  • Duro-Guard ISO Foil

Duro-Guard® EPS Insulation

  • Duro-Guard EPS Type VIII
  • Duro-Guard EPS Type II
  • Duro-Guard EPS Fan Fold
  • Duro-Guard EPS Fiberglass Facer
  • Duro-Guard HD ISO + EPS
  • Duro-Guard EPS Nail Base

DensDeck® Roof Boards

  • DensDeck Roof Board
  • DensDeck Prime Roof Board

Securock® Roof Boards

  • Sescurock® Glass-Mat Roof Board
  • Securock® Gypsum-Fiber Prime Roof Board

Specifications, Marketing & Technical Information

Download the Insulation Brochure

Duro Guard Packing & Weight Chart

Duro-Light™ Skylight Series by Wasco®

Duro-Last® introduces EcoSky3™, a revolutionary new, glare-free unit skylight that bathes the space in natural diffused light and provides high thermal performance.

Available in curb-mount standard sizes from 25 ¼” x 25 ¼” to 60 ½” x 92 ½” and deck-mount standard sizes from 22 ¼” x 57 ½”. Custom sizes available.

Optional Duro-Light Skylights

  • Standard Unit Skylight – Available in thermoformed acrylic single or double domes or pyramids. Standard glazing color options include, clear, white and bronze. Available in curb-mount standard sizes from 22 ¼” x 22 ¼” to 95 ½” x 95 ½” and deck-mount standard sizes from 22 ¼” x 22 ¼” to 92 ½” x 92 ½”. Custom sizes available.
  • Thermalized Fall Protection – Sentinel Series Fall Protection units comply with OSHA Fall Protection Regulations. Available in curb-mount standard sizes from 22″ x 22″ to 95 ½” x 95 ½” and deck mount standard sizes from 19″ x 19″ to 92 ½” x 92 ½”. Custom sizes available.
  • Hurricane Resistant Glazing – Provided with co-polyester to meet testing requirements: ASTM-1886, ASTM-1996, TAS 201, 202 and 203. Available in curb-mount standard sizes from 25 ¼” x 25 ¼” to 49 ½” x 92 ½”. Custom sizes available.
  • Blast Resistant Glazing – Provided with co-polyester to meet test requirements: ASTM-F1642-04, GSA-TS-1-2003. Available in curb-mount standard sizes from 25 ¼” x 25 ¼” to 49 ½” x 81 ½”. Custom sizes available.

 

Other Links & Resources

Request a Quote

Download the Duro-Light™ Fact Sheet

Duro-Light™ Thermalized Skydomes Datasheet

Duro-Light™ EcoSky3 Datasheet

 

Available Configurations

PrintUnit - CAP Curb Mount
Unit - CSUnit - CS

EXCEPTIONAL Roofs Require EXCEPTIONAL Details

standing_seam

Standing Seam: Five profiles and 29 colors, standing seam roofing will enhance the appearance of any sloped roof design.

details_new

Metal Edge Detail: Metal edge details including gutters, scuppers, pitch pans, and other custom fabricated products designed for use with any single-ply roof.

EXCEPTIONAL® Metals manufactures high-quality metal products designed for use with any single-ply roofing system.

Our products include roof accessories, edge details, drainage systems, standing seam roofing, vinyl-coated metal products and custom fabricated products.

View Colors »

View Metal Edge Details »

View Metal Edge Data »

Time off the Roof: Duro-Last’s Heritage of Installation Efficiency For Today’s Roof Technology

Duro-Last built our reputation in the commercial roofing industry by manufacturing precision-fabricated roofing systems in our controlled factory environment. Prefabrication of roofing components provides a number of benefits:

  • Less on-site seaming is required by contractors, which minimizes problems and enables them to get off the roof more quickly and on to the next project.
  • A significant reduction in the potential for installation errors and future leak problems.
  • Prefabrication drastically reduces waste, both during the manufacturing process and installation.
  • Prefabrication requires roofing contractors to plan work carefully, and they are rewarded with greater worker productivity, a higher-quality installation and more satisfied customers.

Recent advances in single-ply installation technology have enabled faster, more secure applications of deck sheets. High-efficiency hot air welders, induction welding systems, and other methods have minimized many of the distinctions between installing prefabricated deck sheets and rolled membrane materials.

Duro-Last has taken our expertise in prefabrication technology and combined it with deck membrane delivered as roll goods. Whether the roof deck of your project is best handled with prefabricated Duro-Last deck sheets, Duro-Last rolls, Duro-Tuff®, or Duro-Fleece® membrane, contractors can optimize installation time by using our precision-fabricated flashings.

Curb, stack, parapet, and other flashings made in a Duro-Last factory not only enable a more secure installation at critical roof transitions, they allow for a highly efficient installation.

For contractors, this means better time management for installation crews, getting them off one roof project and on to the next quickly. For facility owners and managers, this means an efficient roof application that minimizes building disruption.

Whether you choose prefabricated deck sheets or roll goods for your next project, we give roofing contractors, building owners, architects, and specifiers unprecedented flexibility with respect to selecting and installing the right roofing system for virtually any flat or low-sloped facility.

Edge to Edge & Deck to Sky™

Duro-Last delivers the confidence of a secure installation around the entire perimeter of your building, and from the bottom of the roof assembly to the top. Duro-Last is a single-source supplier of roofing components that make up the complete system you need for your facility, engineered to work together to provide long-term, watertight protection.

deck2sky

A – A complete line of Duro-Guard® ISO and EPS insulation products, as well as DensDeck® roof boards

B – Roofing membranes that can be precision-fabricated to rooftop specifications or delivered to the job site as roll goods

C – Curb, stack, parapet, and other flashings made in a Duro-Last factory enable a watertight installation at critical roof transitions

D – Edge details manufactured by Duro-Last subsidiary EXCEPTIONAL® Metals provide an aesthetic and secure termination around the edge of your building. EXCEPTIONAL Metals also makes standing seam roof panels to complement any building design

Your roof is inspected by a member of our National Technical Representative team who, upon approval, issues a single warranty that covers the entire installation from edge to edge and deck to sky™.

2-Piece Snap-On Compression

This is EXCEPTIONAL Metals’ most popular edge detail. It is visually comparable to metal coping systems.

2pc_snapon

  • Snap-on cover is double-hemmed to protect roof material.
  • Installed without perimeter welding.
  • Eliminates need for caulks or sealants.
  • End-notched to provide trouble-free piece-to-piece docking.
  • Available in 10′ lengths; 3″ through 8″ widths.
  • Ready-to-assemble inside and outside corners are available.
Meets ANSI/SPRI ES-1 2003 method RE-2 testing requirements. 4″ meets TAS No. 111-95 testing requirements. Factory Mutual Wind Storm Approval Rating: 4″ FM 1-360 and 6″ FM 1-135.

 

MaterialGaugeFinish
Aluminum.040Mill or Kynar®
Stainless Steel24-gaugeN/A
Bonderized Steel24-gaugeN/A
Galvalume®24-gaugeMill or Kynar®
Copper16 oz.Mill

Installation Details

DetailNamePDF
31102-Piece Snap-On CompressionDownload PDF
35702-Piece Compression ScupperDownload PDF

Product Information

Document Name
2-Piece Snap-On Compression Feature/Benefit
2-Piece Snap-On Compression Product Data Sheet

2-Piece Snap-On Compression LG

Installs the same as 2-Piece Snap-On with pre-punched holes in the base.

2pc_snapon_lg

  • Cover made of .040 aluminum and base made of 22-gauge galvanized steel.
  • Available in 10′ length; 9″ through 13″ widths.
  • 50 and 60-mil membrane coverage available by special order.
  • Available from the Saginaw, Michigan facility.
MaterialGaugeFinish
Aluminum.040Mill or Kynar®

Installation Details

DetailNamePDF
31152-Piece Snap-On Compression LGDownload PDF

Product Information

Document Name
2-Piece Snap-On Compression LG Feature/Benefit
2-Piece Snap-On Compression LG Product Data Sheet

2-Piece Flex Snap-On Compression LG

Exclusive product to be used on radius edges.

2pc_snapon_flex

  • Notched in 3″ intervals to allow metal to easily conform to inside and outside radial surfaces.
  • Field measurement is not required.
  • Base and cover are notched in 3″ intervals to allow metal to easily conform to both inside and outside radial surfaces.
  • Available in 10′ lengths; 3″ through 8″ widths.
MaterialGaugeFinish
Aluminum.040Mill or Kynar®
Stainless Steel24-gaugeN/A
Bonderized Steel24-gaugeN/A
Galvalume®24-gaugeMill or Kynar®
Copper16 oz.Mill

High-Profile™ Fascia

high_profile_fascia
The High Profile Fascia system features an elevated profile to contain water and/or ballast. It is quick and easy to install with a crimping attachment for unmatched securement.

  • Base and cover is fabricated in 10′ lengths; 4½” – 8″ widths.
  • Concealed splice plate design provides a more pleasing appearance than standard cover plates or splice joints.
  • Pre-punched fastening holes in the galvanized water dam ensure correct fastener placement and spacing.
  • Ready to assemble inside and outside corners are available.
MaterialGaugeFinish
Aluminum.040Mill or Kynar®
Stainless Steel24-gaugeN/A
Bonderized Steel24-gaugeN/A
Galvalume®24-gaugeMill or Kynar®

Snap-On Fascia Base

snapon_fascia
Original 2-Piece Snap-On Compression cover fits newly-designed base that can be used on eaves, allowing water to flow over the roof edge termination.

  • Used with 2-Piece Snap-On Compression Cover.
  • Functions as a fascia bar and cover system.
  • Available in 10′ lengths: 3″ through 8″ widths.
4″ and 6″ meet ANSI/SPRI ES-1 2003 Method RE-2 testing requirements.
MaterialGaugeFinish
Aluminum.040Mill or Kynar®
Stainless Steel24-gaugeN/A
Galvalume®24-gaugeMill or Kynar®

Vinyl-Coated Drip Edge

drip_edge
Provides maximum water flow from roof decks with a visually-attractive termination.

  • Consists of a vinyl-coated face with a 6″ attached membrane skirt.
  • Available in white, tan or gray, and can also be painted to match the building design.
  • Can be customized to meet various roof slopes.
  • Easily installed using attached memebrane skirt.
  • Available in 10′ lenghts: 2″ through 8″ widths.

T-Edge

t_edge
The T-Edge detail consists of a top and bottom piece that are hooked together to form a visually-pleasing edge.

The top component consists of a vinyl-coated hook strip with a 6″ attached membrane skirt. The bottom drip edge piece is available in any metal finish with a splice plate that bridges the gap between sections of the T-Edge.

  • Drip edge component available in multiple metals – see below.
  • Hook strip with 6″ attached membrane skirt is availble in white, tan and gray.
  • Available in 10′ lengths: 2″ through 8″ widths.
  • Inside and outside corners available.

T-Edge Plus

t_edge_plus
The double-folded drip edge neatly conceals the vinyl-coated hook strip from view.

The top component consists of a vinyl-coated hook strip with a 6″ attached membrane skirt. The bottom drip edge piece is available in any metal finish with a splice plate that bridges the gap between sections of the T-Edge Plus.

  • Drip edge component available in mutiple metals – see below.
  • Hook strip with 6″ attached membrane skirt is availble in white, tan and gray.
  • Available in 10′ lengths: 2″ through 8″ widths.

Arched Drip Edge

arched_drip_edge
Provides a smooth finish and is a great alternative to multiple segments in traditional piecing.

  • Custom fabricated in five to ten-foot lengths, depending on the building’s arch specifications.
  • Vinyl-coated roof flange is end notched for easy piecing.
  • Vinyl coating enables the contractor to weld a separate skirt both to the flange and the installed roof membrane in order to provide a watertight seal between the two.
  • Available in 5-foot lengths manufactured according to specification.

Edge Extender

edge_extender
Edge extenders are used in conjunction with other edge details, including gutter and coping, to create a professional termination around roofs with wide perimeter designs.

  • Utilizes a continuous cleat for installation on 4″ or wider widths.
  • Available in 10′ lengths: 3″ through 8″ widths and is available in all metal finishes.

1-Piece Reglet

1pc_reglet
Installs into the reglet parapet wall over termination bars when a receiver is not required.

Shields fasteners from elements, preventing oxidation.

Available in 10′ lengths.

2-Piece Reglet

2pc_reglet
Provides extended watertight protection along parapet wall termination.

Top component attaches into parapet wall reglets, and bottom flashing rivets into place. Bottom flashing is easily removed for re-roofing or maintenance. Use rivets to secure counterflashing to the receiver.

Available 10′ lengths.

Surface Mount Counterflashing

counterflashing
Provides a watertight protection along parapet terminations providing a finished look.

Available in 10-foot lengths.

Snap Coping

snap_coping
Offers a complete finish for any parapet wall.

  • Coping cap sections easily snap onto 16-gauge cleat segments with no crimping required.
  • Concealed splice plates allow for thermal movement.
  • Exposed fasteners are concealed by coping cap.

Canted Coping

canted_coping
Ideal for parapet wall areas requiring water to drain toward the roof side.

  • Offers the same appearance of the snap coping, utilizing the 2-piece base as the cleat.
  • Concealed splice plates allow thermal movement.
  • Exposed fasteners are concealed by coping cap.

Flat Coping

flat_coping
Coping rests flat on top of the parapet wall, providing a complete, attractive finish.

  • Installed using a continuous face cleat.
  • Concealed splice plate allows for thermal movement.
  • Exposed fasteners are concealed by coping cap.

Arched Coping

arched_coping
Provides a smooth finish that is an aesthetically-pleasing alternative to traditional piecing.

  • Pre-notched lap joints provide proper water shed.
  • Available in 5′ – 10′ lengths depending on building’s arch specifications.

Scupper With Decorative Metal Flange

flanged_scupper

Offers superior water drainage with an aesthetically-pleasing finish.

  • Eliminates difficult field fabrication, saving time and labor.
  • Scuppers are easily customized to meet any job requirement.
  • Metal flange available in various metal finishes, see below.

Available with white, tan, gray, dark gray, terra cotta, and Rock-Ply® 6″ 40-mil PVC membrane skirt.

Proper measuring:

  • Height minus ¼”
  • Width minus ¼”
  • Through wall exact

Single Skirt Scupper

scupper
Fabricated to specific through-wall measurements to solve drainage challenges.

  • Manufactured with 24-gauge vinyl-coated metal and 40-mil PVC membrane skirt.
  • Prefabricated scuppers with a 2″ terminating metal flange behind the skirt to reduce field fabrication and installation time.
  • Available with white, tan, gray, dark gray, terra cotta, and Rock-Ply® 6″ skirt.

Proper measuring:

  • Height minus ¼”
  • Width minus ¼”
  • Through wall plus 1″

Double Skirt Scupper

double_scupper
Fabricated to specific through-wall measurements to solve drainage challenges.

Eliminates difficult field fabrication, saving time and labor. Most commonly used with the vinyl-back collector. When installed without the collector, this scupper must be terminated according to specifications.

Available with white, tan, gray, dark gray, terra cotta, and Rock-Ply® 6″ 40-mil PVC membrane skirt.

Proper measuring:

  • Height minus ¼”
  • Width minus ¼”
  • Through wall exact

Spill-Out Scupper

spillout_scupper
Used with any sized 2-Piece Snap-On Compression edge detail.

Outside 40-mil PVC membrane corners are used to terminate the deck sheet over the spill-out scupper base and roof edge to ensure watertightness.

Vinyl-Back Collector

collector_box
Assembled with an attached double skirt scupper to allow maximum water flow.

  • Double skirt scupper is factory-attached to vinyl-coated back, making field installation quick and easy.
  • Constructed with a Pittsburgh seam that eliminates the need for rivets.
  • Overflow cutouts can be incorporated into the face or sides, upon request.
  • 40-mil PVC membrane skirt available in white, tan, gray, dark gray, terra cotta, and Rock-Ply®

Conductor

conductor_head

  • Provides the same appearance as the vinyl-back collector box, but are designed to attach to the wall below the scupper, leaving the scupper visible from the ground view.
  • Can be used in conjunction with a metal flange or single skirt scupper.

Downspout

Downspouts are manufactured with a closed or open face.

Downspouts can be customized with multiple bends to meet any water drainage or collection need. Elbows can be incorportated into the downspout assembly for multlple bends, eliminating field assembly.

  • Closed downspouts feature a Pittsburgh seam for a professional finish that also eliminates the need for rivets.
  • Closed downspouts are manufactured with tapered ends easily nesting into each other.
  • Open-Face downspouts help eliminate blockage due to ice and debris build-up.
  • Bottom kickout elbows can be cut into both open and closed downspouts.
  • Can be made up to 20′ long, Saginaw, MI facility only.
  • Custom sizes are available.

DX-Style Gutter

dx_gutter

Front profile features a 45° angle.

  • Available in three standard sizes.
  • Hook straps are shipped loose to be field installed as the termination bar is being attached.
  • Shipped nestled inside each other to reduce shipping costs.
  • Internal splice plates reduce installation time.
  • Can be made up to 20′ long, Saginaw, MI facility only.
  • Inside and outside miters can be fabricated to any angle.
  • Custom sizes and profiles are available.

EX-Style Gutter

ex_gutter-1

Front profile features an 80° angle.

  • Available in three standard sizes.
  • Hook straps are shipped loose to be field installed as the termination bar is being attached.
  • Shipped nestled inside each other to reduce shipping costs.
  • Internal splice plates reduce installation time.
  • Can be made up to 20′ long, Saginaw, MI facility only.
  • Inside and outside miters can be fabricated to any angle.
  • Custom sizes and profiles are available.

LX-Style Gutter

lx_gutter-1

Front profile features a classic 90° angle.

  • Available in three standard sizes.
  • Hook straps are shipped loose to be field installed as the termination bar is being attached.
  • Shipped nestled inside each other to reduce shipping costs.
  • Internal splice plates reduce installation time.
  • Can be made up to 20′ long, Saginaw, MI facility only.
  • Inside and outside miters can be fabricated to any angle.
  • Custom sizes and profiles are available.

MX-Style Gutter

mx_gutter-1

Front profile features a 72° angle.

  • Available in three standard sizes.
  • Hook straps are shipped loose to be field installed as the termination bar is being attached.
  • Shipped nestled inside each other to reduce shipping costs.
  • Internal splice plates reduce installation time.
  • Can be made up to 20′ long, Saginaw, MI facility only.
  • Inside and outside miters can be fabricated to any angle.
  • Custom sizes and profiles are available.

Vinyl-Coated Pitch Pan

pitch_pan

Prefabricated pitch pans deliver a watertight seal around rooftop protrusions.

  • Manufactured from 24-gauge vinyl-coated metal with a 6-inch skirt.
  • 40-mil PVC membrane white, tan, gray, dark gray, terra cotta, or Rock-Ply® skirt.
  • Available in 8″ heights and custom lengths and widths.
DetailNamePDF
4045Vinyl-Coated Metal Pitch PanExceptionalMetalsTechDetails-details-4045

ATR Hub

atr_hub

An alternative to using multiple pitch pans in one small area.

  • Manufactured from 24-gauge vinyl-coated metal with a 6″ 40-mil PVC membrane skirt.
  • 24-gauge Galvalume® prefinished top replaces the need for pourable filler.
  • Available in 8″ x 8″ x 14″ standard or custom sizes.
  • Choose from white, tan, or gray vinyl-coated metal.
  • Choose from white, tan, gray, dark gray, terra cotta, or Rock-Ply® skirt.
DetailNamePDF
4047ATR HubExceptionalMetalsTechDetails-details-4045

ExceptionalMetalsTechDetails-details-4047

Duro-Flash II

duro_flash

Used as a termination under existing metal counterflashing.

  • Consists of a 3″ wide vinyl-coated metal piece with an attached 12″ PVC membrane skirt.
  • Available in 10′ lengths.
  • Available with white, tan, gray, dark gray, terra cotta, or Rock-Ply® 40-mil PVC membrane skirt.

EXCEPTIONAL Metals – Metal Edge Details

Detail NumberDetail NameCategoryPDF
2060Double Skirt Scupper & Metal Flange ScupperDrainage Download PDF
2061Single Skirt ScupperDrainage Download PDF
2070Vinyl-Back Collector BoxDrainage Download PDF
2071Conductor HeadDrainage Download PDF
2080DownspoutDrainage Download PDF
2085Downspout ElbowsDrainage Download PDF
2086Square-to-Round AdapterDrainage Download PDF
2091Gutter Attachment X-SeriesDrainage Download PDF
2095Gutter Expansion JointDrainage Download PDF
3025X-Series Gutter InstallationDrainage Download PDF
31102-Piece Snap-On CompressionPerimeter & Roof Edge Download PDF
31152-Piece Snap-On Compression LGPerimeter & Roof Edge Download PDF
3120Vinyl-Coated Drip EdgePerimeter & Roof Edge Download PDF
35132-Piece Snap-On Flex CompressionPerimeter & Roof Edge Download PDF
3540Metal Edge ExtenderPerimeter & Roof Edge Download PDF
3550T-EdgePerimeter & Roof Edge Download PDF
3555T-Edge PlusPerimeter & Roof Edge Download PDF
3560Fascia BasePerimeter & Roof Edge Download PDF
35702-Piece Compression ScupperDrainage Download PDF
3590High-Profile FasciaPerimeter & Roof Edge Download PDF
4045Vinyl-Coated Metal Pitch PanVinyl Clad Accessories Download PDF
4047ATR HubVinyl Clad Accessories Download PDF
6040Arched Drip EdgePerimeter & Roof Edge Download PDF
6050Flat Coping CapCoping Download PDF
6050IFlat Coping Cap InstallationCoping Download PDF
6052Canted Coping CapCoping Download PDF
6052ICanted Coping Cap InstallationCoping Download PDF
6054I1Snap Coping Installation 1Coping Download PDF
6054I2Snap Coping Installation 2Coping Download PDF
6056Arched Coping CapCoping Download PDF
6056IArched Coping Cap InstallationCoping Download PDF
61301-Piece RegletReglet Download PDF
61452-Piece RegletReglet Download PDF

EXCEPTIONAL Metals – Metal Edge Data

Product Data Sheet NameCategoryPDF
2-Piece Compression Scupper Feature/BenefitDrainage Download PDF
2-Piece Compression Scupper Product Data SheetDrainage Download PDF
2-Piece Snap-On Compression Feature/BenefitPerimeter & Roof Edge Download PDF
2-Piece Snap-On Compression LG Feature/BenefitPerimeter & Roof Edge Download PDF
2-Piece Snap-On Compression LG Product Data SheetPerimeter & Roof Edge Download PDF
2-Piece Snap-On Compression Product Data SheetPerimeter & Roof Edge Download PDF
2-Piece Snap-On Flex Feature/BenefitPerimeter & Roof Edge Download PDF
2-Piece Snap-On Flex Product Data SheetPerimeter & Roof Edge Download PDF
Arched Coping Cap Feature/BenefitCoping Download PDF
Arched Coping Cap Product Data SheetCoping Download PDF
Arched Drip Edge Feature/BenefitVinyl Clad Accessories Download PDF
Arched Drip Edge Product Data SheetPerimeter & Roof Edge Download PDF
ATR Hub Feature/BenefitVinyl Clad Accessories Download PDF
ATR Hub Product Data SheetVinyl Clad Accessories Download PDF
Canted Coping Cap Feature/BenefitCoping Download PDF
Canted Coping Cap Product Data SheetCoping Download PDF
Conductor Head Feature/BenefitDrainage Download PDF
Conductor Head Product Data SheetDrainage Download PDF
Downspout Feature/BenefitDrainage Download PDF
Downspout Product Data SheetDrainage Download PDF
Flat Coping Cap Feature/BenefitCoping Download PDF
Flat Coping Cap Product Data SheetCoping Download PDF
Gutter Feature/BenefitDrainage Download PDF
Gutter Product Data SheetDrainage Download PDF
High-Profile Fascia Feature/BenefitPerimeter & Roof Edge Download PDF
High-Profile Fascia Product Data SheetPerimeter & Roof Edge Download PDF
Reglet Feature/BenefitReglet Download PDF
Reglet Product Data SheetPerimeter & Roof Edge Download PDF
Scupper Feature/BenefitDrainage Download PDF
Scupper Product Data SheetDrainage Download PDF
Snap Coping Feature/BenefitCoping Download PDF
Snap Coping Product Data SheetCoping Download PDF
Snap-On Fascia Base Data SheetPerimeter & Roof Edge Download PDF
Snap-On Fascia Base Feature Benefit SheetPerimeter & Roof Edge Download PDF
T-Edge Feature/BenefitPerimeter & Roof Edge Download PDF
T-Edge Plus Feature/BenefitPerimeter & Roof Edge Download PDF
T-Edge Plus Product Data SheetPerimeter & Roof Edge Download PDF
T-Edge Product Data SheetPerimeter & Roof Edge Download PDF
Template Measuring InstructionsCoping Download PDF
Vinyl-Back Collector Box Feature/BenefitDrainage Download PDF
Vinyl-Back Collector Box Product Data SheetDrainage Download PDF
Vinyl-Coated Drip Edge Feature/BenefitVinyl Clad Accessories Download PDF
Vinyl-Coated Drip Edge Product Data SheetVinyl Clad Accessories Download PDF
Vinyl-Coated Metal Pitch Pan Feature/BenefitVinyl Clad Accessories Download PDF
Vinyl-Coated Metal Pitch Pan Product Data SheetVinyl Clad Accessories Download PDF

Roof Products and Systems

The Duro-Last Single-Ply Roof Membrane

membrane_rolls_large

The Duro-Last vinyl roof membrane is a proprietary thermoplastic formulation consisting of PVC resins, plasticizers, stabilizers, biocides, flame retardants and U.V. absorbents. A weft-insertion knitted scrim that is laminated between two layers of PVC film gives the membrane its strength and durability. The Duro-Last single-ply membrane is available in white, gray, dark gray, tan, or terra cotta.

Our flexible roof membrane is easily prefabricated into deck sheets up to 2,500 square feet in size, as well as custom-made parapet, stack, and curb flashings that eliminate most labor from critical roof areas – transitions and changes of plane. Prefabrication provides architects, specifiers, consultants, contractors, and building owners peace-of-mind regarding the watertight security of the roof installation.

Duro-Last has met or exceeded all major fire and wind code requirements, and regional approvals as necessary throughout the country. These certifications reinforce Duro-Last’s leadership in providing the consistent, watertight integrity that building owners expect.

Duro-Last has been approved by Factory Mutual as a 1-60,1-75, 1-90, 1-95, 1-105, 1-135, 1-150, 1-165, 1-195, 1-210, 1-270, 1-435, and 1-495 roofing system. Duro-Last is also listed by Underwriters Laboratories as a Class A, B, & C approved material. Evaluation services ICBO and NES have merged to form ICC-ES, which has evaluated Duro-Last for the International Building Code (IBC). The Duro-Last roofing system has been approved by the IBC and by code agency MIAMI-DADE for use in their respective jurisdictions.

Duro-Last is proud to be a charter partner of the ENERGY STAR® Roof Products Program. The ENERGY STAR label indicates to building owners and managers that the Duro-Last white vinyl roof membrane can save them money on cooling costs due to its high reflectivity (reflects 88% of the sun’s energy). Duro-Last is also a charter member of the Cool Roof Rating Council (CRRC) and a member of the United States Green Building Council (USGBC). Duro-Last participates in all major technical committees in the roofing industry, plus the American Society of Testing Materials (ASTM).

codes-600px

Duro-Shield Metal Retrofit Roofing System

Are rusted roof decks and leaky seams starting to compromise your building’s watertight integrity?

The Duro-Shield roofing system is the long-term way to protect your building against rain, temperature changes, interior drips, ice build-up, and rust and corrosion. The Duro-Shield single-ply membrane is prefabricated in our factory; custom designed to fit your metal roof exactly, eliminating up to 80-85% of rooftop installation labor. Our metal retrofit solution keeps Mother Nature outside, while your inventory, equipment, and workers stay safe and dry inside.

The Duro-Shield metal retrofit system is also energy-efficient, resistant to chemicals, fire and high winds, and virtually maintenance-free.

If time has caught up with your metal roof, it’s time you consider the Duro-Shield roofing system. Contact us to find out how a Duro-Shield metal retrofit roofing system can help you lock out leaks and lock in your investment.

Compare the Facts

Compare Duro-Last to those other manufacturers and see for yourself who comes out ahead!

The Manufacturing Process

Every Duro-Last roofing system is precision-fabricated to fit even the most complicated, uniquely-shaped rooftops. Every Duro-Last system is delivered to the job site with all components included and up to 85% of membrane seaming completed in our factory. Also, custom fabricated parapets, and stack and curb flashings eliminate the majority of labor from the most critical roof areas – transitions and changes of plane. Prefabrication enables authorized Duro-Last contractors to install faster, with less disruption and fewer callbacks.

 

Hydro-Stop

Hydro-Stop Roofing is a world leader in the manufacturing of environmentally safe roofing system and waterproofing systems. Hydro-Stop roofing is formulated to provide permanent solutions to water ingress problems throughout the entire building envelope.

Exceptional Metals Accessories

Standing Seam Metal Roofs


Perimeter & Roof Edge

EXCEPTIONAL® Metals manufactures high-quality metal products designed for use with any single-ply roof. EXCEPTIONAL Metals products that are made from vinyl-coated metal enable contractors to provide a secure, watertight bond between that metal product and the roof deck or parapet wall membrane.


Reglet

EXCEPTIONAL® Metals manufactures high-quality metal products designed for use with any single-ply roof. Reglets and Surface Mount Counterflashings are designed to be used on parapet walls.


Coping

EXCEPTIONAL® Metals offers various coping systems that can provide a complete finish and enhance drainage from any parapet wall.


Drainage

EXCEPTIONAL® Metals offers several drainage products, including gutters, downspouts, scuppers, and collector boxes. These products are ideal for channeling water away from a building.


Vinyl Clad Accessories – EXCEPTIONAL® Metals

At EXCEPTIONAL® Metals, our highly skilled staff can take your ideas and quickly transform them into quality-assured products that solve problems, meet needs, and improve productivity. Customized EXCEPTIONAL Metals products made from vinyl-coated metal enable contractors to provide a secure watertight bond between the metal product and the vinyl membrane roof deck or parapet wall.


Custom Products

custom_cornice

Let us save you time and resources. Simply submit a drawing for a free estimate and allow us to design a quality-assured product that meets your needs. Whether you require one item, or 100, we fabricate all runs quickly and efficiently.

White = Green™

white-equals-green

White=Green™ roofing by Duro-Last is committed to being the industry leader when it comes to producing environmentally friendly roofing systems. Using Duro-Last’s white “Cool Zone” membrane is the best “green” choice for your facility in many ways!

environmental_responsibility

Environmental Responsibility

Green, as in environment friendliness: closed loop manufacturing, membrane recyclable, and long-term performance.

chino

Low Life-Cycle Costs

Green, as in the money you will save with the Cool Zone system – from reducing energy bills to preserving building components.

bardessono

Garden Roof Membrane

Green, as in the best membrane to install under a garden roof system.

The New Colors of Duro-Tuff® and Duro-Fleece®

colors

  • Duro-Tuff® 50-Mil and 60 Mil
  • Duro-Fleece® 50-Mil and 60 Mil
  • Thickest top weathering film in roofing industry
  • Roll widths from 2-1/2 feet to 10-foot wide
  • Top and bottom film same color to reduce bleed out
  • Membrane and vinyl rib accessories

Product Data Sheets

Download PDF files

Membrane: DL – Duro Last®

DL60 Membrane
DL50 Membrane
DL40 Membrane

Custom Curbs, Stacks, and Corners

Corner Flashing
Curb Flashing
Stack Flashing

Drains and Scuppers

Dome Strainer
Drain Boot
Scuppers

80-Mil Membrane

Duro Fleece 80 Mil
Duro Tuff 80 Mil

Duro-Guard® Fan Fold Products

XPS Fan Fold – P
XPS Fan Fold – A
EPS Fan Fold

Duro-Guard® Insulation Products

EPS Flute Fill Combo
ISO HD Composite

Membrane: DS – Designer Series

Rock-Ply® Membrane
Shingle-Ply® Membrane

Membrane: EV – Duro-Last® EV

EV50 Membrane
EV60 Membrane

Slip Sheets

Duro-Blue Separation Slip Sheet
Duro-Weave Separation Slip Sheet

Termination and Edge Details

Metal Compression System

Two-Way Air Vents

Two-Way Air Vent

Walkway Pad

Roof Trak III Walkway Pad